The Deep Socket Tool 10mm was specifically made to suite the 14.100 Super UT and the 17.800 Post Anchor as both these models have a 10mm Hex shape as feature on the shafts which provide a positive nonslip grab on the screw shafts during installation. The pack includes 3/8" socket adaptor together with the Deep Socket, this will [...]
Cabinet and Furniture Hardware
The range of work/counter top connectors are many with various lengths and thickness available. Other models are suited for angled and mitre joining of furniture and stairs. Knock down models allow for bed and table manufacture while some are perfectly suited for CNC machine production.
- Cabinet and Furniture Hardware
- Knock Down Connectors
- Worktop/Countertop Connectors
- Catches
- Bed and Table Connectors
- Angle Mitre Connectors
Routing Template 40.200
Worktop/Countertop Connectors, Accessories
This is a Great New Accessory for cut-out preparations in countertops, worktops and panels suiting five Zipbolt models, 10.700, 10.600, 10.500, 10.800 and 10.900. Simply align the marked Zipbolt model on the Template with the edge of the top then squaring off with the centre line and secure with appropriate screws. Using a router with the specified bit [...]
Universal Drill Guide Kit 40.280
Accessories
The Universal Drill Guide Kit 40.280 is suited for a wide range of Zipbolt Connectors with the various hole height positions allowing hole preparations in different material thicknesses, it also caters for boring the insert screw holes. It comes in a neat box with all the necessary drill bits matched to the guide, the chart on the box [...]
Ultra Slim Connector 18.100
Worktop/Countertop Connectors
The Ultra Slim Zipbolt 18.100 has again tested engineering limits and we have been able to reduce the profile thickness to 10mm without compromising torque/tensioning especially relative to the size reduction. The requests for such a connector came from the countertop industry with the development of HPL and Compact laminate being very slim, approximately 13mm there was a [...]
XT Post Anchor 17.800
Stair Connectors, Post Fasteners, Exterior Range
The XT Post Anchor is likely to be the set standard when it comes to strength, this product is designed for surface mounting Exterior posts onto decking areas, porches, and verandas. The new design offers 5 anchoring screw points with the central screw being the longest and then when the base plate is screwed onto the long shaft [...]
Deep Socket Tool 7mm – 40.520
Accessories
This custom made deep socket is the perfect tool accessory when assembling with the 13.600 Railbolt. The socket fits over the hex shape on the screw shaft and then can be easily driven into wood with a power drill making the job quick and easy.
Deep Socket Tool 6mm – 40.500
Accessories
This custom made deep socket is the perfect tool accessory when assembling with the 16.600 Micro Railbolt, it neatly fits over the shaft and when the socket meet the rail you simply stop and the depth is perfect
Zipbolt Exterior Slipfix 17.150
Railbolts, Exterior Range
Slipfix Exterior is the first model we have created for outdoor uses, it is a combination of stainless steel parts and epoxy coated and baked parts, the reason is coated parts could not be made from stainless steel. We have tested the product to 1,000 hrs corrosion test and 1,500 hrs of salt spray test with satisfaction. Slipfix [...]
Angled Slipfix 13.900
Stair Connectors, Railbolts
Note:We recommend that this product be used on the upstairs angle joint while using Zipbolt 11.550 for the bottom angle joint. Angled Slipfix Railbolt with a flexible head is another model for the stair industry and is the sister product to the Slipfix Railbolt, this connector particularly designed for joining handrail to a post at an acute angle [...]
Railbolt Drill Guide 40.260
Accessories
The Railbolt Drill Guide is perfectly suited for the Zipbolt UT Railbolt 13.600 and can also be used with adjustment for the Angled Railbolt 11.550 and now all the Slipfix models (13.801,13.950,13.900) where boring onto the rail/fitting is needed. It will make the job of boring accurately into the end grain of rails and fittings much easier, please [...]
Daisy Catch 20.100 Side Mount
Catches, Cabinet and Furniture Hardware
DAISY CATCH is a one piece corner or bi-fold door solution, it has been designed for quick easy fitting, while protecting the adjacent door and maintaining door gap. False panels or removable panels is another use for the Daisy Catch in conjunction with Easy Cleat, this system offers flexible positioning and also adjustment in the holding power.
Daisy Catch 20.200 Inline
Catches, Cabinet and Furniture Hardware
DAISY CATCH is a one piece corner or bi-fold door solution, it has been designed for quick easy fitting, while protecting the adjacent door and maintaining door gap. False panels or removable panels is another use for the Daisy Catch in conjunction with Easy Cleat, this system offers flexible positioning and also adjustment in the holding power.
Daisy Catch Inline – Top Mount
Catches, Cabinet and Furniture Hardware
DAISY CATCH INLINE -TOP MOUNT is a corner or bi-fold door solution and has been designed for quick easy fitting, while protecting the adjacent door and maintaining door gap. This model uses the Easy Cleat as a contact surface for the Daisy Catch where a vertical member in the cabinet does not exist; it can be used in [...]
Zipbolt UT 11.720 – Mini Half Mitre (6mmx85mm)
Angle Mitre Connectors, Cabinet and Furniture Hardware
The Zipbolt UT - Mini Half Mitre offers excellent on-site assembly as no clamp is required, making it suitable for shop-fitting, exhibition assembly or furniture and cabinet making construction. In general the half mitre joint is unusual where a panel with a cut angle is joined to a flat section; this joint is now made easy and without [...]
Zipbolt UT 11.700 – Mini Mitre (6mmx135mm)
Angle Mitre Connectors, Cabinet and Furniture Hardware
Zipbolt UT - Mitre connectors are the ideal solution for angle joints and are suitable for a variety of application from furniture construction to staircase designs. The UT Mitre is truly flexible by allowing any angle between 90 and 180 degrees but with distinct advantages that allow the shaft to pass through the back of the housing providing [...]
Zipbolt Fastfit 15.100
Knock Down Connectors, Cabinet and Furniture Hardware
The Fastfit is truly a one piece - one step connector, this new generation of knockdown connector continues to incorporate Zipbolts Patented gear drive technology to achieve a new approach to furniture/cabinet assembly. It is released coinciding with the world wide trend towards the use of CNC Routers or Nesting machines and the result is fast and easy [...]
Zipbolt Onedrive 15.200
Knock Down Connectors, Cabinet and Furniture Hardware
Onedrive is a fully self contained one piece connector with a self exiting screw shaft and is specifically designed for the users of CNC routers/nesting machines. Once the cut-out is produced the Ondrive is simply inserted and is flush fitting after which it is easily tightened with a hex bit in a screwdriver or cordless drill and is [...]
Zipbolt UT Mini 12.600 – KD (6xmmx43mm)
Knock Down Connectors, Cabinet and Furniture Hardware
The Zipbolt UT - Mini KD is an alternative KD connector to cam lock types which offers superior tensioning and will not work its way loose. Fitting this connector involves simply screwing the shaft directly into a 5mm hole in the material and then joining the members after which the diecast housing is installed with a 4mm hex [...]
Zipbolt UT Mini 12.601 – KD Open Cut (6mmx30mm)
Knock Down Connectors, Cabinet and Furniture Hardware
The Zipbolt UT - Mini KD is an alternative KD connector to cam lock types which offers superior tensioning and will not work its way loose. Fitting this connector involves simply screwing the shaft directly into a 5mm hole in the material and then joining the members after which the diecast housing is installed with a 4mm hex [...]
Zipbolt UT Mini 12.700 – KD8(8mmx90mm)
Knock Down Connectors, Bed and Table Connectors, Cabinet and Furniture Hardware
The NEW die cast "Open Channel" housing is a major development by Zipbolt which allows the housing to be placed over the shaft easily engaging the thread and positioning the housing at the right height even if the hole was bored too deep. A reduced housing size also permits the housing to travel within the accommodating (25mm) hole [...]
Zipbolt UT Mini 12.720 – KD6(6mmx90mm)
Knock Down Connectors, Bed and Table Connectors, Cabinet and Furniture Hardware
The NEW die cast "Open Channel" housing is a major development by Zipbolt which allows the housing to be placed over the shaft easily engaging the thread and positioning the housing at the right height even if the hole was bored too deep. A reduced housing size also permits the housing to travel within the accommodating (25mm) hole [...]
Zipbolt UT 10.500 – 80mmx35mm
Worktop/Countertop Connectors, Cabinet and Furniture Hardware
The fastest and easiest way of joining work /counter tops in a matter of seconds! The ZIPBOLT connector is a new practical and innovative solution that saves time and money in assembling work / counter tops and panels. The Zipbolt UT requires a simple 5mm Allen key or hex bit as a driving tool and this ensures a [...]
Zipbolt UT 10.520 – 81mmx25mm
Worktop/Countertop Connectors, Cabinet and Furniture Hardware
The fastest and easiest way of joining work /counter tops in a matter of seconds! The ZIPBOLT connector is a new practical and innovative solution that saves time and money in assembling work / counter tops and panels. The Zipbolt UT requires a simple 5mm Allen key or hex bit as a driving tool and this ensures a [...]
Zipbolt UT 10.600 – 116mmx35mm
Worktop/Countertop Connectors, Cabinet and Furniture Hardware
The fastest and easiest way of joining work /counter tops in a matter of seconds! The ZIPBOLT connector is a new practical and innovative solution that saves time and money in assembling work / counter tops and panels. The Zipbolt UT requires a simple 5mm Allen key or hex bit as a driving tool and this ensures a [...]
Zipbolt UT 10.700 – 165mmx35mm
Worktop/Countertop Connectors, Cabinet and Furniture Hardware
The fastest and easiest way of joining work /counter tops in a matter of seconds! The ZIPBOLT connector is a new practical and innovative solution that saves time and money in assembling work / counter tops and panels. The Zipbolt UT requires a simple 5mm Allen key or hex bit as a driving tool and this ensures a [...]
Zipbolt UT 10.900 – Drawbolt 6mmx100mm
Worktop/Countertop Connectors, Cabinet and Furniture Hardware
The ZIPBOLT UT DRAWBOLT is the result of an engineering challenge to retain Zipbolt's UT design and to scale down the size while retaining the strength, we did it! It is only 12.5mm or 1/2 thick in profile with all metal housing. The UT DRAWBOLT was specifically designed for the USA to be a better alternative to the [...]
Zipbolt UT Mini 10.800 6mmx100mm
Worktop/Countertop Connectors, Cabinet and Furniture Hardware
It is the fastest and easiest way of joining worktops /countertops and panels in a matter of seconds! The ZIPBOLT connector is a new practical and innovative solution that saves time and money in assembling work / counter tops and panels. The 10.800 is a particularly slim type connector which is perfect for material as thin as 16mm [...]
Zipbolt Super UT 14.100 – 12mmx278mm
Post Fasteners, Stair Connectors
Introducing the new Super UT - Post Fastener, this improved model is an all metal design and features the Open Channel in the diecast housing which allows for easy locating to the shaft, this feature alone is very significant to making this product very user friendly. The Zipbolt gear drive system allows the connector to be positioned deep [...]
Zipbolt Angled Slipfix Railbolt 13.950
Stair Connectors, Railbolts
Angled Slipfix Railbolt is the latest product for the stair industry and is the sister product to the Slipfix Railbolt, this connector particularly designed for joining handrail to a post at an acute angle (upstairs joint). The angled shaft is preinstalled into the rail with a slight protrusion then can be engaged to the fitted keyhole disc in [...]
Zipbolt Slipfix RailBolt 13.801
Stair Connectors, Railbolts
The 13.801 really plays its' part when it is used between 2 fixed posts, the shaft retracts flush with the end grain of the rail and when needed extends our to meet the keyhole disc in the post, then it is simply tightened.
Zipbolt UT 11.550 – Angled Railbolt
Angle Mitre Connectors, Railbolts, Stair Connectors, Railbolts, Cabinet and Furniture Hardware
Note, The 11.550 is perfect for downstairs angle joints however when doing the top joint in the same rail we recommend the 13.950 or 13.900 Angled Slipfix.
Zipbolt UT 13.500 – ST Maxi(8mmx90mm)
Bed and Table Connectors, Railbolts, Stair Connectors, Knock Down Connectors, Cabinet and Furniture Hardware
The NEW die cast "Open Channel" housing is a major development by Zipbolt which allows the housing to be placed over the shaft easily engaging the thread and positioning the housing at the right height even if the hole was bored too deep. A reduced housing size also permits the housing to travel within the accommodating (25mm) hole [...]
Zipbolt UT 13.520 – ST Midi (6mmx90mm)
Bed and Table Connectors, Railbolts, Stair Connectors, Knock Down Connectors, Cabinet and Furniture Hardware
The NEW die cast "Open Channel" housing is a major development by Zipbolt which allows the housing to be placed over the shaft easily engaging the thread and positioning the housing at the right height even if the hole was bored too deep. A reduced housing size also permits the housing to travel within the accommodating (25mm) hole [...]
Zipbolt UT Micro Railbolt 16.600
Stair Connectors, Knock Down Connectors, Railbolts, Cabinet and Furniture Hardware
The Micro Railbolt is an addition to the stair range of connectors and has been developed for use in low profile or small handrail sizes and is perfect for joining handrails to fittings or handrails to newels. This model retains all the features of the UT Housing but in a reduced size both in diameter and thickness/profile allowing [...]
Zipbolt UT 11.600 – Maxi Mitre 8mmx135mm
Angle Mitre Connectors, Stair Connectors, Railbolts, Cabinet and Furniture Hardware
The 11.600 is perfect for any angle and in all directions, this means horizontal and vertical angles.
Zipbolt UT Mini 10.820 – Line Bored 6mm x 90mm
Worktop/Countertop Connectors, Cabinet and Furniture Hardware
The ZIPBOLT UT MINI Line Borad is the result of an engineering challenge to retain Zipbolt’s UT design and to scale down the size while retaining the strength, we did it! It is only 12.5mm or 1/2" thick in profile with all metal housing. This model allows the user to install the connector by passing the shaft through [...]
Zipbolt UT Railbolt 13.600
Stair Connectors, Knock Down Connectors, Railbolts, Cabinet and Furniture Hardware
For anyone who has ever assembled a staircase, the time saving benefits alone will amaze you! The new Open Channel diecast housing allows the user to drop the housing over the shaft for easy thread engagement even if the accommodating hole is bored too deep, once engaged using a hex bit with power or an Allen key it [...]